30
C
USTOMIZING YOUR PHONE PHONE STATUS VIA MITEL WEB UI
Phone status via Mitel Web UI
Use the following procedure to view the phone status via the Mitel Web UI.
1. Open your web browser, enter the phone’s IP address or host name into the address field and press
Enter.
2. In the Username/Password window, enter your username and password and click OK. The Status
window displays for the IP phone you are accessing.
NOTE: The default username is user and the password field is left blank.
This Status window displays the status of your phone, which includes the following information:
• Network Status
• Hardware Information
• Firmware Information
• SIP Status
SIP Account Status
The IP phones show the SIP registration status on the IP phone’s Status screen in the Mitel Web UI.
The following table describes the status conditions that can display for the account.
To Next Page
Loading...
