63
C
USTOMIZING YOUR PHONE DIALING
The Brightness Timer option allows you to set the amount of time you want the LCD display to stay illu-
minated before turning the backlight off during a period of inactivity. For example, if you set the brightness
timer to 60, when the phone reaches 60 seconds of inactivity, the LCD backlight goes off.
NOTE: The
Backlight timer/mode can be configured using the configuration files and the IP Phone User Interface (UI).
Setting the Brightness Level and Timer Using the IP Phone UI
1. Press on the phone to enter the Options List.
2. Navigate to the Displayoption and press the select button or Select softkey.
3. Press the down navigation key twice to highlight Brightness Level.
4. Use the left and right navigation buttons to increase or decrease the intensity of brightness on the
LCD.
5. Press the down navigation key to highlight Brightness Timer.
6. Enter a value, in seconds, using the dialpad keys. You can set the timer from 1 to 36000 seconds.
Default is 600 (10 minutes).
7. Press the Save softkey to save your changes.
Dialing
Live Dialpad
The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live dialpad
feature enabled, the 6920 IP phone automatically dials out and turns on handsfree mode as soon as a
dialpad key or softkey is pressed. With live dialpad disabled, if you dial a number while the phone is
on-hook, lifting the receiver or pressing the initiates a call to that number.
NOTE: The availability
of this feature is dependent on your phone system or service provider.
You can enable/disable the live dialpad using the IP phone UI only.
To Next Page
Loading...
