137
M
ANAGING CALLS DIRECTORY
General Directory Functions
Accessing and Navigating the Directory (No External Sources Configured/Enabled)
1. Press the softkey.
If no external Directory sources are configured or enabled, the local Directory is displayed as per the
following image.
NOTE: If the Directory is empty, a Directory empty message displays.
2. You can view entry details by pressing the up and down navigation keys to scroll through the list.
3. From the number selection column, press the right navigation key to display the contact’s details
screen.
You can use the up and down navigation keys to scroll through the list of numbers or press the right
navigation key to move to the address column and scroll through the contact’s addresses using the
up and down navigation keys.
4. Press the softkey configured with Directory functionality, key, or Quit softkey to exit.
To Next Page
Loading...
