67
C
ONFIGURING SOFTKEYS
Configuring Softkeys
The 6920 SIP IP phone has 6 multi-functional left softkeys and 4 multi-functional bottom softkeys:
• 6 left softkeys: programmable non-state-based softkeys (up to 20 programmable functions)
• 4 bottom softkeys: programmable state-based softkeys (up to 18 programmable functions)
NOTE:
a. If M695 Expansion Modules are attached to the phone, you can configure up to an additional 84
softkeys on each M695 Expansion Module.
b. The 6920 IP phone allows up to 3 expansion modules on each phone.
You can use the Mitel Web UI to configure key functions.
The following table lists the functions you can set on the softkeys and provides a description for each func-
tion.
Key Function Description
None Indicates the key has no function assigned.
Line Indicates the key is configured for line use
(programmable on the left softkeys only).
Speed Dial Indicates the key is configured for speed dial use.
Do Not Disturb Indicates the key is configured for Do Not Disturb
(DND) functionality.
BLF Indicates the key is configured for Busy Lamp
Field (BLF) functionality (programmable on the
left softkeys only).
To Next Page
Loading...
