68
C
ONFIGURING SOFTKEYS
BLF/List Indicates the key is configured for BLF/List
functionality (programmable on the left softkeys
only).
XML Indicates the key is configured to accept an XML
application for accessing customized XML
services.
Flash Indicates the key is set to generate a flash event
when it is pressed. The IP phone generates flash
events only when a call is connected and there is
an active RTP stream (for example, when the call
is not on hold).
Sprecode Indicates the key is configured to automatically
activate specific services offered by the server.
For example, if the sprecode value of *82 is
configured, then by pressing the Sprecode key,
*82 automatically activates a service provided by
the call manager.
Park Indicates the key is configured to park incoming
calls when pressed.
Pickup Indicates the key is configured to pick up parked
calls when pressed.
Last Call Return Indicates the key is configured for Last Call
Return functionality when pressed.
Call Fwd Indicates the key is configured as a Call Forward
key. When pressed, the IP phone UI displays the
Call Forward menus.
BLF/Xfer Indicates the key is configured as a simplified
BLF key and a Transfer key. You can use this key
to perform the BLF function as well as use it as a
transfer key to transfer calls (programmable on
the left softkeys only).
Speed Dial/Xfer Indicates the key is configured as a simplified
speed dial key and a transfer key. You can use
this key to perform speed dial functions as well as
use it as a transfer key to transfer calls.
Speed Dial/Conf Indicates the key is configured as a speed dial
key and a conference key. You can use this key
to speed dial from within a conference call and
add the new call directly to the conference.
Key Function Description
To Next Page
Loading...
