27
C
USTOMIZING YOUR PHONE PHONE STATUS VIA IP PHONE UI
Phone status via IP phone UI
The Status settings in the Settingsmenu allows you to view your phone’s:
• Firmware Info: Information in the firmware version of phone, boot version and platform.
• Network:General information regarding your phone’s network settings such as IP address, MAC
address, and port information - LAN Port, PC Port.
• Storage:Storage information of directory list, callers list and redial list.
• Error Messages:Displays error messages for the phone. If there are no error messages, a No Error
Messages text is displayed.
NOTE: Press the Copyright softkey to view copyright information.
Basic Settings Preferences - Allows you to enable/disable the following:
• Park Call
• Pick Up Parked Call
• Display DTMF Digits
• Play Call Waiting Tone
• Stuttered Dial Tone
• XML Beep Support
• Status Scroll Delay (seconds)
• Switch UI Focus to Ringing Line
• Call Hold Reminder During Active Calls
• Call Hold Reminder
• Call Waiting Tone Period
• Preferred line
• Preferred line Timeout (seconds)
• Goodbye Key Cancels Incoming Call
• Message Waiting Indicator Line
• DND Key Mode
• Call Forward Key Mode
This category also allows you to configure:
• Incoming Intercom Call Settings
• Group Paging RTP Settings
• Ring Tones (global and per-line basis)
• Time and Date Settings
• Language Settings
Account Configuration- Allows you to configure DND and Call
Forward by account. You can have multiple accounts on the 6920.
Custom Ringtones - Allows you to upload up to 8 custom WAV file
ringtones on the phone that can be used as your incoming ring tone.
Category Description
To Next Page
Loading...
