Mitel 6920 - Configuring a Sprecode Key Using the Mitel Web UI; Park;Pickup Keys

85
C
ONFIGURING SOFTKEYS PARK/PICKUP KEYS
Configuring a Sprecode Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Sprecode.
4. In the Label field, enter a label to display on the IP phone for this key.
5. In the Value field, enter the appropriate value for accessing specific services from the server.
NOTE: For values to enter in this field, contact your System Administrator.
6. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84(M695).
8. In the Type field, select Sprecode.
9. In the Value field, enter the appropriate value for accessing specific services from the server.
NOTE: For values to enter in this field, contact your System Administrator.
10. Click Save Settings.
Park/Pickup Keys
The 6920 SIP IP phone has a park and pickup call feature that allows you to park a call and pickup a call
when required. The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Park key to park the
call.
• After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the
call.