Mitel 6920 - Outgoing Redial Key; Configuring a Outgoing Redial Key Using the Mitel Web UI

98
C
ONFIGURING SOFTKEYS OUTGOING REDIAL KEY
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, select Callers List.
8. Click Save Settings.
Outgoing Redial Key
By default, the 6920 has a dedicated Outgoing Redial key. However, using the Mitel Web UI, you can
assign the Outgoing Redial key to any key on the left or bottom keys on the phone.
The Outgoing Redial List is a stored log of your outgoing calls. You can use the Outgoing Redial key to
access a list of the most recent calls you placed.
Configuring a Outgoing Redial Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.