Mitel 6920 - Display

61
C
USTOMIZING YOUR PHONE DISPLAY
Installing Custom Ring Tones Using the Mitel Web UI
1. Click on Basic Settings > Custom Ringtones.
2. Press the Browse...button corresponding to the desired ringtone position (e.g. 1).
3. Navigate to the folder containing the WAV file you want to upload, select the file using your left mouse
button, and press the Open button.The filename should now be displayed to the right of the respective
Browse... button.
4. Press the Upload button to upload the file to the phone.
NOTE: Press the Delete button to delete the desired ringtone from your phone.
5. Repeat Steps 2 to 4 to upload additional WAV files to the phone.
NOTE:
a. Access to the Custom Ringtones Web UI menu is only available if enabled by your System
Administrator. Ringtones must be in .wav format. The IP phones support the following WAV file
specifications:
• G.711 μ-law and a-law Codec
• 20 ms packet size
• Mono 8KHz
b. Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight WAV files
cannot exceed 8 MB).
c. Filenames must contain only ASCII characters.
Display
The Display option allows you to set the following on your phone:
• Home Screen Settings:
• Home Screen Mode
• Screen Saver Timer