Mitel 6920 - Intercom Key; Configuring an Intercom Key Using the Mitel Web UI

101
C
ONFIGURING SOFTKEYS INTERCOM KEY
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Transfer.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, select Transfer.
8. Click Save Settings.
Intercom Key
You can use the Intercom key to automatically connect with a remote extension for outgoing calls, and
to answer an incoming intercom call.
Configuring an Intercom Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.