Mitel 6920 - Transfer Key; Configuring a Transfer Key Using the Mitel Web UI

100
C
ONFIGURING SOFTKEYS TRANSFER KEY
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, selectConference.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, selectConference.
8. Click Save Settings.
Transfer Key
Using the Mitel Web UI, you can assign the Transfer key to any key on the left or bottom keys on the
phone.
Configuring a Transfer Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.