167
CHAPTER 8 FUNCTIONS
8
8.3 IP Packet Transfer Function
8.3.7 Example of communications using the IP packet transfer function
3. Configure the CC-Link IE Field Network gateway setting in the Ethernet adapter module 1.
Setting item tree NZ2GF-ETB [Parameter] "CC-Link IE Field
Network"
Configure the setting as follows.
4. Write the set parameters to the Ethernet adapter module 1.
[Online] [Write]
Station where the IP packet passes through last
(Network No. , station No. )
To transmit communications to the request destination ,
the IP packet passes through the station
with the network address No. and station No. .
Request source
Request
destination
To Next Page
Loading...
