84
7.2 Network Settings
Set the network number, station number, and other parameters for the master/local module.
(1) Setting procedure
1. Open the setting window.
Project window [Parameter] [Network Parameter] [Ethernet/CC IE/MELSECNET]
2. Set parameters in the window.
3. Click the button.
Item Description Setting range
Set the network
configuration setting in
the CC IE Field
configuration window
Select the checkbox to set the network configuration setting
graphically. The setting can be easily configured by selecting the
module from the module list. ( Page 89, Section 7.3 (1))
• Do not use the CC IE Field
configuration window to set the
network configuration setting. (The
checkbox is not checked.)
• Use the CC IE Field configuration
window to set the network
configuration setting. (The checkbox
is checked.)
(Default: Do not use the CC IE Field
configuration window to set the network
configuration setting. (The checkbox is
not checked.))
Network Type
Select whether to use the master/local module as a master station,
local station, or submaster station. One master station and one
submaster station can be set in a network.
• CC IE Field (Master Station)
• CC IE Field (Local Station)
• CC IE Field (Sub-Master Station)
(Default: Blank)
Start I/O No.
Enter the start I/O number of the master/local module in increments of
16 points.
Within the number of I/O points of the
CPU module (Default: Blank)
To Next Page
Loading...
