Mitsubishi Electric QJ71GF11-T2 - Transient Transmission Range of the Link Dedicated Instruction

238
(b) Transient transmission range of the link dedicated instruction
• Single network system
It is possible to communicate with all stations on the network.
• Multiple network system
Communications can be made with stations up to eight networks apart by setting routing parameters.
( Page 119, Section 7.8)
Use the communication test in CC-Link IE Field Network diagnostics to check whether the routing of transient transmission
from the own station to the destination is correctly performed or not.
(Relay station 1)
CC-Link IE
Field Network
Network No.1
Network No.9
Network No.2 Network No.3
Network No.4
Network No.6
Network No.7
Network No.5
Network No.8
(Relay station 4)
CPU
module
(Relay station 2)
(Relay station 7)
(Relay station 8)
(Relay station 3)
(Relay station 5)
(Relay station 6)
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
CPU
module
Own
station