Mitsubishi Electric QJ71GF11-T2 - CC-Link IE Field Network Configuration; Single Network System

49
CHAPTER 5 SYSTEM CONFIGURATION
5
5.2 CC-Link IE Field Network Configuration 5.2.1 Single network system
5.2 CC-Link IE Field Network Configuration
This section describes CC-Link IE Field Network configurations.
5.2.1 Single network system
(1) Overall system configuration
A single network system is a system in which a master station and slave stations are connected using Ethernet
cables as shown below. Up to 120 slave stations (including a submaster station) and one master station can be
connected.
Switching hub
Ethernet cable
(1000BASE-T)
Master station
Up to 120 stations1 station
Slave station (including a submaster station)