214
9.3 Diagnostic Window
This section describes items displayed in the "CC IE Field Diagnostics" window.
Item Description
Select
Diagnostics
Destination
Module Displays the master/local module being diagnosed.
button
When multiple master/local modules are mounted, the target module can be changed.
When multiple master/local modules of the same network number are mounted on the same
base unit, the module with the smallest start I/O number is always diagnosed, regardless of
setting.
Select Station
Select a station to be diagnosed. If an error occurs in the selected station, "(Error)" is displayed
after the station number.
A station to be diagnosed can be selected by clicking the module icon displayed in the network
map.
Monitor
Status
button
Starts monitoring of the CC-Link IE Field Network diagnostics.
button
Stops monitoring of the CC-Link IE Field Network diagnostics.
button
• When a serial number (first five digits) of the master station is "17022" or later
Executes the network map update to match them if the actual network configuration and
network map of the diagnostic window are inconsistent. ( Page 57, Section 5.2.3 (7) (a))
• When a serial number (first five digits) of the master station is "17021" or earlier
Deletes a disconnected station displayed in the network map. The deleted station is displayed
in the disconnected station monitor area.
Network map
display area
Disconnected station
monitor area
To Next Page
Loading...
