215
CHAPTER 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
9
9.3 Diagnostic Window
button
Displays the meaning of icons displayed in the "CC IE Field Diagnostics" window.
St. Info
The display name of the slave station can be selected from "By Device Name" and "By Station
Type". When "By Device Name" is selected, the information entered in the device name of the
network configuration settings is displayed.
Note the following points for the display in "By Device Name".
• When the name of a device is not entered in the network configuration setting, the station type
is displayed.
• When "Operate with Parameter of Host Station" is set in the network settings of the project for
the submaster station and the submaster station starts to operate as a master operating
station, the name entered in the network configuration setting of the submaster station is
displayed. (When the name of a device is not entered, the station type is displayed.)
• When "Operate with Parameter of Master Station" is set in the network settings of the project
for the submaster station and the submaster station starts to operate as a master operating
station, the station type is displayed.
Network
Status
Total Slave Stations
(Set In Parameter)
Displays the total number of slave stations set by parameter.
Total Slave Stations
(Connected)
Displays the total number of slave stations during data link on CC-Link IE Field Network.
Current Link Scan
Time
Displays the link scan time of the displayed network.
Number of Station
Errors Detected
Displays the number of error stations in the displayed network.
Item Description
To Next Page
Loading...
