EasyManua.ls Logo

Mitsubishi Electric QJ71GF11-T2 - Communication Speed; When a Request Source Device and a Request Destination Device Are Connected to a CPU Module

Mitsubishi Electric QJ71GF11-T2
568 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
172
8.3.8 Communication speed
This section provides the results of communication speed measured using the IP packet transfer function. Use the
results as a reference.
(1) When a request source device and a request destination device are connected
to a CPU module
The results are based on measurement when FTP communications are performed with four modules connected
in star topology.
(a) System configuration
Device Description
Ethernet device (request source
device)
<FTP client>
CPU
Intel
®
Core 2 Duo processor 2.80GHz
OS
Microsoft
®
Windows
®
7 Professional Operating System
Ethernet board 1000BASE-T
FTP client application FFFTP
Ethernet device (request
destination device)
<FTP server>
CPU
Intel
®
Core i5 processor 2.67GHz
OS
Microsoft
®
Windows
®
7 Professional Operating System
Ethernet board 1000BASE-T
FTP server
application
FileZilla Server
Programmable controller
CPU module
Q06UDEHCPU
Sequence scan time: 1ms
Service processing setting: performed according to the
proportion of scan time (10%)
CC-Link IE Field
Network
Cyclic transmission
RX/RY setting : 128 points assigned to each station
RWw/RWr setting : 256 points assigned to each station
Transient transmission
N/A
Ethernet device (request destination device)
<FTP server>
Ethernet device (request source device)
<FTP client>
EthernetEthernet

Table of Contents

Related product manuals