235
CHAPTER 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
9
9.8 Remote Operation
*1 To perform remote RESET, preset "Allow" in "Remote Reset" in the "PLC System" of the PLC parameter window.
*2 Remove the memory card by the procedure described in the manual for the CPU module.
( User's Manual (Hardware Design, Maintenance and Inspection) for the CPU module used)
6. Select a remote operation to be performed under
"Operation" and "Operation during RUN".
7. Click the button to perform the remote
operation.
Item Description
RUN
Select a remote operation to be performed to the
CPU module.
STOP
PAUS E
Latch Clear
RESET
*1
Remove Memory
Card
*2
Device Memory
Select whether to clear device memory data in
the CPU module when remote RUN is
performed.
Signal Flow
Select whether to hold signal flow when remote
RUN is performed.
To Next Page
Loading...
