MUTOH Ultima - Parts List

User’s Guide – Ultima cutting plotter
12 AP-75032, Rev 2.2, 20/04/07
2.2. PARTS LIST
Contents of the plotter box
A
Plotter unit with roll support system, 2
conveyor rolls and small guiding flanges.
J Adapter Cable
B Box with stand and instructions how to install K Mutoh Ultima User’s Guide.
C
One knife holder with pre-mounted cutting
blade
L Application Guide
D
Blade for auto sheet-off. (1 pc – pre-installed
in tool head)
M Quick Start Manual (includes a CD-rom)
E
Set of 2 spare cutting blades and 1 spring for
cutting jobs (45°/ Offset 0.50 mm).
N Ultima Installation CD
F Pressurized ballpoint pen O 5 test sheet verify epos alignment (AP-77010)
G Power Cord. P Quality Cut Sheet
H RS-232 and USB interface cable Q Spare Cutting Mat (1 piece)
I IF-Cable R Starter software kit
(*)
(*)
When ordered as a bundle together with a Mutoh Printer, the in-the-box software may be replaced with one software which handles
cutting, printing and contourcutting.