MUTOH ValueJet 1304 - Page 66

User’s Guide ValueJet 1304
Handling the printer
66 AP-75780 - Revision 1.3
Dist.Adj menu
Initial print menu
Performs an initial adjust print
Setup item Settings Description
PF
Initial print
Performs initial adjust print
 ENTER: shifts to the sub menu
Refer to: Initial print menu on page66
Initial Change
Set up initial adjust change
 ENTER: shifts to the sub menu
Refer to: Initial change menu on page67
Confirm print
Performs confirm print
 ENTER: shifts to the sub menu
Refer to:Confirm Print menu on page67
Micro print
Performs a micro adjustment print
 ENTER: shifts to the sub menu
Refer to: Micro Print menu on page67
Micro change
set up micro adjustment change
 ENTER: shifts to the sub menu
Refer to: Micro Change menu on page68
---
 CANCEL: shifts to the previous menu
Refer to: User media menu on page63
Setup item Settings Description
FeedLength
100 mm to <250 mm>
to 500 mm
Changes the length of the media feed
direction for initial adjust print.
 ENTER: determines the setting. “Printing
is displayd and initial adjust print starts.
After printing the printer returns to
Normal.
---
 CANCEL: shifts to the previous menu
Refer to:Dist.Adj menu on page66