MUTOH ValueJet 1608 HS - Set 6: Media Width;Mediawidth Check Menu

User’s Guide ValueJet 1608 HS
Printer menu
AP-75810 - Revision 2.0 119
5
Set 6: Media Width/MediaWidth check menu
Set up the distance between the right end from 5 mm and the left end if media detection is not
performed when initializing the media.
Media width menu
Media width check menu
Note
 Setting a larger value than the actual media width in the media width menu may
cause ink to be fired on the printer.
Setup item Setting Description
Media width
<1000 mm> to 1625
mm
Sets the media width
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Setup item Setting Description
Width confirm
****mm
Display the media width detected while
initializing.
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Downloaded From ManualsPrinter.com Manuals