MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Basics
46 AP-75810 - Revision 2.0
3.3.4 Head height adjustment
Printing with high printing rate or using strongly-curved media can cause head crashes.
Adjusting the distance from the print head surface to the media (head height) allows you to
prevent head crashes.
Follow the procedure below to adjust the head height
Step 1: Press Menu.
 The operation panel displays “Menu 1: Setup>.
 The operation panel shifts to the Setup menu display.
Step 2: Press the >.
 The operation panel displays “Set1: MediaType”.
Step 3: Press Enter.
 The operation panel displays “Media: Type 1".
Note
 If raising the head height, high print quality is not guaranteed.
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English