MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Basics
66 AP-75810 - Revision 2.0
3.6 Emptying the waste bottle
The timing and method for the disposal of waste fluid are described below.
Disposal timing
Dispose the waste fluids in the following cases:
 When the waste fluid tank is more than half full.
 When the operation panel displays “Waste Ink Tank Full”.
Disposal method
Follow the procedure below to dispose of waste fluid.
Step 1: Prepare an empty container to contain the waste fluid.
Step 2: Lay a protective material on the floor under the waste fluid tank.
Step 3: Open the waste fluid valve, and transfer the waste fluid to the container.
Step 4: After pouring the waste fluid into the empty container, close the waste fluid valve.
Step 5: Wipe the opening of the waste fluid valve with a cloth.
Important
 Waste fluid is considered industrial waste. Proper waste fluid disposal
according to industrial waste disposal laws and ordinances of your local
government is required.
Note
 When pouring the waste fluid to the empty container, the waste fluid may
splash, therefore put the container close to the waste fluid valve.
1
2
N° Description
1
Waste fluid valve
2 Empty container
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English