MUTOH ValueJet 1608 HS - Setting Media Type

User’s Guide ValueJet 1608 HS
Basics
40 AP-75810 - Revision 2.0
3.2.3 Setting media type
This section explains how to set the media type.
Step 1: Power ON the printer.
Step 2: Load media.
Step 3: Press + or - to select the type of media.
Step 4: Press ENTER.
Note
 After changing the media type, reset the media feed compensation.
Note
 If not touching any keys for 10 seconds, or pressing CANCEL when in the media
type setup menu, the printer starts media initial operation with the media type
displayed on the panel.
Downloaded From ManualsPrinter.com Manuals