MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Basics
68 AP-75810 - Revision 2.0
Step 6: Move the printer.
Reinstalling
After moving the printer, follow the procedure below to set it ready for use.
Step 1: Select a suitable place for installation.
Refer to the installation guide for more information.
Step 2:
Move and install the printer to the location.
Step 3: Attach all cables such as the power cables
Step 4: Perform a nozzle check and confirm that there is no clogging in the print head.
3.7.2 Transporting the printer
When transporting the printer, it is necessary to pack in the same condition as purchased
using protective and packing materials to protect the printer from vibrations and shocks.
Note
 The casters supplied with the dedicated stand are manufactured for little
movement in flat indoor areas, not for transporting equipment.
Note
 When transporting the printer, consult your local Mutoh Technician.
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English