MUTOH ValueJet 1608 HS - Changing the Printer Status; Changing from Menu Mode to Normal Mode; Changing from Normal Mode to Menu Mode

User’s Guide ValueJet 1608 HS
Printer menu
92 AP-75810 - Revision 2.0
5.1.3 Changing the printer status
Changing from Normal mode to Menu mode.
Press Menu.
The operation panel displays “Menu 1: Setup>” and the display shifts to the Setup menu.
Changing from Menu mode to normal mode
When the printer is at the Setup menu display, perform on of the following operations to shift
to the Normal display.
 Press Cancel.
 In the setup menu, leave the keys untouched for 3 minutes.
Normal
Setup Menu Display
[Menu] key
[Cancel] key
Leave the printer
as it is for 3 minutes
Note
 The printer will not return to the normal status, even when leaving the keys
untouched for 3 minutes when displaying the CR maintenance menu.
Downloaded From ManualsPrinter.com Manuals