MUTOH ValueJet 1608 HS - Platen Heater Temperature Setting

User’s Guide ValueJet 1608 HS
Basics
AP-75810 - Revision 2.0 53
3
Platen Heater temperature setting
Follow the procedure below to set the platen heater temperature.
Step 1: Press Menu.
 The operation panel displays “Menu 1: Setup>”.
Step 2: Press >.
 The operation panel displays “Set1: MediaType”.
Step 3: Press Enter.
 The operation panel displays “Media: Type 1".
Downloaded From ManualsPrinter.com Manuals