MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Basics
30 AP-75810 - Revision 2.0
3.1.2 Switching the power OFF
Step 1: Verify that.
 Printing or other operations are not in progress.
 The operation panel display is Normal.
Step 2: Press Power to switch OFF the printer.
 The operation panel displays “CR Mainte.: Start”.
Step 3: Press ENTER.
 Maintenance starts.
 The print head moves to the left.
 The cleaning wiper raises.
 The operation panel displays “CR Maintenance: End”.
Step 4: Clean the cleaning wiper unit.
Refer to Cleaning the cleaning wiper unit and head cap unit on page144
Note
 If pressing the POWER, or the power indication light lights up green, the power
is ON.
 Press the key once again to switch OFF the printer.
 In case the head temperature is higher than 41°C, the Head cooling down
procedure starts automatically. This sequence continues until the head
temperature is back at 37°C.
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English