MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Printer menu
124 AP-75810 - Revision 2.0
Set 14: Strike wait menu
sets the waiting time while overwrite printing.
Set 15: Slant Check menu
sets slant detection during media loading.
Set 16:Auto cleaning menu
Sets up the auto cleaning.
Note
 By increasing the strike wait time, you allow more time for the ink to settle and
fix.
Setup item Setting Description
Strike wait
<0.0 sec> to 0.1 sec
to 5.0 sec
Set the strike wait time
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Setup item Setting Description
Slant Check
OFF Slant check is not being performed
<ON>
Performs slant check between 2
consecutive print jobs
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Setup item Setting Description
Auto Cleaning
Waiting time
Set the value for auto cleaning in standby
mode.
Printing time
Sets the value for auto cleaning in printing
mode
Before print
Sets the value for auto cleaning the pre
printing mode.
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English