User’s Guide ValueJet 1608 HS
Preparations before printing
AP-75810 - Revision 2.0 85
4
4.4 Adjust print
Used to align the print head.
Step 1: Switch On the printer and load the roll media.
Step 2: Press Menu.
The operation panel displays “Menu1:Setup>”.
Step 3: Press >.
The operation panel displays “Set1: MediaType”.
Note
This printer has been adjusted for optimum print quality before shipment at the
Mutoh factory.
Align the print head when the print quality decreases after the installation
environment or the media has been changed.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
