User’s Guide ValueJet 1608 HS
Preparations before printing
84 AP-75810 - Revision 2.0
Step 23: Press Enter.
The operation panel displays “Printing”.
After completing the micro adjustment printing, the operation panel displays
“PF4:Micro Print”.
Refer to the illustrations below and check the printing result.
Step 24: Press + or – to select “PF5:Micro Change”.
Step 25: Press Enter.
The operation panel displays “Micro: 0pulse”.
Step 26: Press + or – and enter the micro adjustment value according to the printing result in
previous step.
Step 27: Press Enter.
The micro adjustment value is saved.
The operation panel displays “PF5:Micro Change”.
Step 28: Press Cancel several times.
The operation panel returns to Normal.
The adjustment of media feed compensation value is complete.
Current adjustment value
2
1
0
1
2
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
