MUTOH ValueJet 1608 HS - Performing a Test Print

User’s Guide ValueJet 1608 HS
Preparations before printing
76 AP-75810 - Revision 2.0
4.2.2 Performing a Test print
Step 1: Verify that the printer is ON and that the media is more than an A3 size.
Step 2: Verify that the printer is in Normal mode.
 Press menu.
 The operation panel displays “Menu 1: Setup>”.
 Press + or - to select “Menu 2: TestPrint”.
 Press >.
 The operation panel displays “Test1: NozzleCheck”.
Downloaded From ManualsPrinter.com Manuals