User’s Guide ValueJet 1608 HS
Periodical maintenance
158 AP-75810 - Revision 2.0
6.2 Done by Authorized Mutoh Technician
An Authorized Mutoh technician should check and replace some components of your printer
on a regular basis (every 6 and 12 months).
Be sure to have these periodical service interventions planned in a timely manner.
It is very important not to skip a maintenance intervention in order to maintain constant print
quality and to keep your warranty;
Please refer to the table below to know what the Authorized Mutoh technician must do.
N° Action Frequency
1
Replace cap of the maintenance station Every 6 months
2 Replace wiper + clean the wiper arm Every 6 months
3 Replace dampers Once a year
4 Replace the maintenance station Once a year
5 VJ wiper unit assy Once a year
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
