MUTOH ValueJet 1608 HS - Usable Media Information

User’s Guide ValueJet 1608 HS
Preparations before printing
72 AP-75810 - Revision 2.0
4.1 General info on usable media
4.1.1 Media compatibility
The Mutoh ValueJet 1608 HS printer offers a wide media compatibility with both uncoated
and coated media.
The appropriate media needs to be selected in accordance with the application type. Mutoh
offers a selection of dedicated coated and uncoated media.
Next to this, a wide range of media from known media brands in the market has been tested
and found compatible with the ValueJet 1608 HS printer.
Be sure to read and understand the safety warnings before handling the printer.
Note
 For details on the recommended media, visit www.Mutoh.eu or contact your
local Mutoh dealer.
 If printer failures or malfunctions occur by using non compatible media:
 The printer will not be covered by the warranty and repair expenses will have to be
paid by the customer.
 For details refer to the “Periodical maintenance on page135” and “Troubleshooting on
page159”.
 If repair is necessary, contact your local Mutoh dealer.
Note
 When using tested and compatible media, the print quality is set according to
each media type.
 When printing on non compatible or non-tested media:
 Refer to the media specifications of the media supplier for information on the media
type or appropriate settings for this printer.
Downloaded From ManualsPrinter.com Manuals