User’s Guide ValueJet 1608 HS
Basics
42 AP-75810 - Revision 2.0
3.3 Perfect media handling
3.3.1 Unwinder / Winder 100 / T-winder 30
The Winder systems always provide an equal tension on the media when printing.
It is important that the Winder system is perfectly lined out to prevent cockling. To line out the
Winder system, please refer to the corresponding User’s Guide.
3.3.2 Rigid printing tables
When printing on Rigid materials, we recommend to install the rigid printing tables. These
tables will smoothly guide your media through the printer.
For more information, please refer to the installation guide of the rigid printing tables.
3.3.3 Media retainers
Some media tends to curl and cockle, which could lead to head crashes. Media retainers
keep the media edges pushed down.
Note
When using roll media, we recommend you to always use the media retainers.
Note
When using sheet media, media retainers are not necessary used. If used,
make sure the media is loaded straight. Otherwise, media can slant and the
media retainers could tear the media.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General