MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Printer menu
122 AP-75810 - Revision 2.0
Set 10: Prev. Stick menu
Set up to prevent media from sticking when printing starts.
Set 11: Media heat menu
Configure the settings for the pre-heat operation.
Note
 When setting the winding unit menu to “Type 1” the setting for the Prev. Stick
menu is disabled.
Setup item Setting Description
Prev. Stick
OFF Sticking prevention is not performed
<ON>
Performs the sticking prevention. Feed the
media back and forth to prevent sticking.
---
 ENTER: Saves the settings and shifts to
the previous hierarchy.
 CANCEL: cancels the settings and shifts to
the previous hierarchy.
Setup item Setup item Setting Description
Media heat
Pre heat <N°> cnt
Sets the number of times the print head
moves while preheating the rigid’s
surface
After heat <N°> cnt
Sets the number of times the print head
moves while federating the rigid’s surface
--- ---
 ENTER: Saves the settings and shifts
to the previous hierarchy.
 CANCEL: cancels the settings and
shifts to the previous hierarchy.
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English