MUTOH ValueJet 1608 HS - Power ON;OFF Procedures

User’s Guide ValueJet 1608 HS
Basics
AP-75810 - Revision 2.0 29
3
3.1 Switching the power ON/OFF
3.1.1 Switching the power ON
Step 1: Press Power to switch ON the printer.
 When the initial operation is complete, the printer enters Normal.
Be sure to read and understand the safety warnings before handling the printer.
Note
 If there is a problem during the initial operation, the operation panel displays a
message and the printer may stop operating.
In case the operation stops, refer to “Troubleshooting on page159
”
Downloaded From ManualsPrinter.com Manuals