MUTOH ValueJet 1608 HS - White or Black Lines Appear on Printed Media

User’s Guide ValueJet 1608 HS
AP-75810 - Revision 2.0 169
7
White or black lines appear on printed media
N° Possible cause Remedy Reference
1
Are you using recommended
media?
Use recommended media.
Setting media
type on page40
2 Is the roll media loaded correctly? Load the roll media correctly.
Loading roll
media on
page37
3
Are the nozzles in good
condition?
Perform a Head cleaning.
Head cleaning
on page141
4 Did you perform an Alignment? Perform an Alignment.
Set the correct
distance adjust
(Step) on
page81
5
Did you perform Media feed
compensation?
Perform Media feed
compensation.
Set the correct
distance adjust
(Step) on
page81
6
Is each heater set to the
appropriate temperature?
Set it to the appropriate
temperature.
Heater settings
on page50
7
Is pressure adjustment value set
correctly?
Set an appropriate pressure
value.
Adjusting the
pressure on the
media on
page48
Downloaded From ManualsPrinter.com Manuals