MUTOH ValueJet 1608 HS - Page 77

User’s Guide ValueJet 1608 HS
Preparations before printing
AP-75810 - Revision 2.0 77
4
Step 3: Press + or - to select a test print menu.
 Nozzle Check
 Mode print
 Set List
 All Setup List
 Palette
Step 4: Press ENTER.
 Start Test print for the selected item.
Step 5: Repeat the previous steps when performing test print for other items.
Step 6: Press Cancel to exit from the test print.
Note
 When setting “Banner 1” or “Banner 2” in the print mode menu, the test print
menu does not display “PalettePrint”.
Downloaded From ManualsPrinter.com Manuals