MUTOH ValueJet 1608 HS - Page 54

User’s Guide ValueJet 1608 HS
Basics
54 AP-75810 - Revision 2.0
Step 4: Press + or – to select the media type.
Step 5: Press Enter.
 The operation panel displays “**>1: Print Mode”.
Step 6: Press the + or – to select “**4: Platen heater”.
Step 7: Press Enter.
 The operation panel displays “Platen heater: 42° C”.
Step 8: Press + or – to set the platen heater temperature.
Step 9: Press Enter.
 The temperature of platen heater is set.
Note
 The selected media (Type 1 to 30) is displayed in “**”.
Refer to
Set 1: MediaType menu on page106
Downloaded From ManualsPrinter.com Manuals