User’s Guide ValueJet 1608 HS
Basics
AP-75810 - Revision 2.0 47
3
Step 4: Press the + or – to select the media type to use.
Step 5: Press Enter.
The operation panel displays “**>1: Print Mode”.
Step 6: Press the + or - to change the setting value.
Step 7: Press Enter.
The value set is saved.
The operation panel displays “**>9: Thickness Ajst.”.
Step 8: Press Cancel several times.
The operation panel returns to Normal.
Head height adjustment is complete.
Note
The valid range is as follows:
Upper limit: 11.0 mm
Lower limit: 0.0 mm
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
