MUTOH ValueJet 1608 HS - Page 34

User’s Guide ValueJet 1608 HS
Basics
34 AP-75810 - Revision 2.0
Step 3: Open the front cover.
Step 4: Put the dowels in place.
Step 5: Load the media on the rear table making use of the media guidance system.
Step 6: Manually feed the media through.
Dowel
Note
 When loading rigid media, make sure that the outer pressure rollers are at least
half covered.
 If the outer pressure rollers are not half covered, reposition the dowels so that
the outer pressure rollers are fully covered.
1
2
1
2
1
2
Downloaded From ManualsPrinter.com Manuals