User’s Guide ValueJet 1608 HS
Basics
36 AP-75810 - Revision 2.0
Step 12: Press ENTER.
The media type is set.
The operation panel displays “Head Height Initial”.
Head height initial operation starts.
The media's thickness is detected and the optimum distance of the printhead
from the platen is automatically adjusted. The operation panel displays
“Change:*.* =>”.
Step 13: To change the setting value for the head height, press + or - and change the setting.
Note
Before starting the printing operation, make sure to remove the dowels. This to
ensure unstraight media follows the correct feeding path.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
