MUTOH ValueJet 1608 HS - Page 56

User’s Guide ValueJet 1608 HS
Basics
56 AP-75810 - Revision 2.0
Step 4: Press + or – to select the media type for using.
Step 5: Press Enter.
 The operation panel displays “**>1: Print Mode”.
Step 6: Press + or – to select “**5: After heater”.
Step 7: Press Enter.
 The operation panel displays “After heater: Off”.
Step 8: Press + or – to set the drier temperature.
Step 9: Press Enter.
 The temperature of drier is set.
Note
 The selected media (Type 1 to 30) is displayed in “**”.
Refer to
Set 1: MediaType menu on page106
Downloaded From ManualsPrinter.com Manuals