Before using VJ-1628X OPERATION MANUAL
130 3.7 Print quality adjustment
5. “Pattern*: 4” (refer to the chart below for *) is displayed on Operation panel.
• The pattern name indicated by * differs depending on the set print mode.
Print modes and corresponding pattern names are listed as follows.
• Refer to the following for Print mode.
5.1.1.1.1 Print Mode menu
6. Press the [+] key or [-] key on Operation panel to enter the number that you selected in Step 4.
• When you press the [Cancel] key on Operation panel, the display returns to “Adj.3: Fine Pattern”.
Print Mode Pattern name
Quality 1, 2 C
Quality 3, 4 B
Graphics 1, 2 E
Graphics 3, 4 D
Banner 1, 2 A
Banner 3, 4 A
To Next Page
Loading...
Need help?
General