VJ-1628X OPERATION MANUAL Before using
3.7 Print quality adjustment 137
3. Press the [Enter] key on Operation panel.
• “Warming Up Skip ->E” is displayed on Operation panel.
• While “Warming Up” is displayed, do not touch Platen and Media guide.
They become very hot and you could burn yourself.
• You can start printing during warming up.
4.4.7 Starting printing during warming up
• A confirmation pattern for print quality adjustment is printed.
(Starts printing after warming up is complete.)
• Six confirmation patterns of A to F will be printed.
• After the confirmation pattern is printed, Operation panel returns to “Adj.1: Confirm Ptn.”.
Bi dir
Low H.Height
normal speed
large drop family
Bi dir
Low H.Height
normal speed
small drop family
To Next Page
Loading...
Need help?
General