EasyManuals Logo

MUTOH ValueJet VJ1324X User Manual

MUTOH ValueJet VJ1324X
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Handling the printer VJ-1324X OPERATION MANUAL
130 4.4 Operating from the operation panel
4.4.7 Start Printing during Warm up
You can start printing even when the heater temperature has not reached the preset value while the printer
is being warmed up.
NOTE
Even when printing is started during warm up, the printer continues to be warmed up until the preset
temperature has been reached.
When printing is started during warm up, the print quality is not guaranteed.
1. Check if the printer is the printer is being warmed up.
“Warming Up” is displayed on the operation panel.
2. Send the data.
“Warming Up” “Skip -> E” is displayed on the operation panel.
CAUTION
While “Warming Up” is displayed, do not touch Platen and Media guide.
You could burn yourself.
3. When printing during warm up, press the [Enter] key on the operation panel.
The printer starts printing.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MUTOH ValueJet VJ1324X and is the answer not in the manual?

MUTOH ValueJet VJ1324X Specifications

General IconGeneral
BrandMUTOH
ModelValueJet VJ1324X
CategoryPrinter
LanguageEnglish

Related product manuals