VJ-1324X OPERATION MANUAL Handling the printer
4.2 Media 115
4.2.6 Media feed adjustment
This section explains the Media feed adjustment.
The feeding length depends on the media type. The following or similar results may be seen in prints.
• Printed images overlap.
• White lines are printed on images.
The accuracy of media feeding may be improved with the following methods.
1. Display the Dist.Adj menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• “Menu1: Setup>” is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
• “Set1: User Type” is displayed on the operation panel.
c. Press the [Enter] key on the operation panel.
• “User: Type 1” is displayed on the operation panel.
d. Press the [+] key or [-] key on the operation panel to select the media type to use.
e. Press the [Enter] key on the operation panel.
• “**>1: Print Mode” is displayed on the operation panel.
•The selected media (Type 1 to 30) is displayed in “**”.
5.1.1 User Type menu
f. Press the [+] key or [–] key to select “**>3: PF Adjust>”.
g. Press the [>] key on the operation panel.
• “PF1: Initial Print” is displayed on the operation panel.
• Proceed to Dist.Adj menu.
5.1.1.1.4 Dist.Adj menu
To Next Page
Loading...
