VJ-1324X OPERATION MANUAL Maintenance
6.1 Replacing consumable components 203
8. When not loading the roll media, install the movable stopper to the scroller and set the scroller to the
printer.
6.1.3 Replacing Cutter
This section describes when and how to replace the cutter.
(1) Replacement time
Replace the cutter when the following situation occurs.
a. When the paper is not cut smoothly
b. When the cut surface is feathered, etc
(2) Type
Our genuine cutter that is compatible with the printer is as follows.
No. Name
1 Movable media stopper
2 Scroller
Description Model No.
Cutter replacement blade VJ-CB
To Next Page
Loading...
Need help?
General